Turbosound TCS-122 Manual do Utilizador descarregar pdf

Arraying and Rigging

TCS series

TCS series Arraying and Rigging - Page 1

TCS Arraying and Rigging

This document explains how TCS loudspeakers can be arrayed and the reasons for the rotatable

horns in some models. The TCS-122 and TCS-152 both feature Turbosound’s unique Dendritic high

frequency waveguide. This can be rotated for two reasons:

1. To allow a single speaker to be mounted horizontally but still retain the wider horizontal

pattern, or

2. To allow two or more speakers of the same to be arrayed with minimal interference

The second application is explained here in detail.

One of the benefits of the Dendritic waveguide is its exceptional coverage pattern and sharp edge-of-

pattern cut-off as demonstrated in Flex Array. The sharp cut-off works either vertically or horizontally,

depending on which way the horn is rotated.

To explain this further, the TCS-122 and TCS-152

feature exceptional pattern control either left/right or

up/down depending on how the horn is rotated. This

allows them to be arrayed with adjacent speakers

without lobes or destructive interference. So the true

arrayable benefit of the Dendritic is

in the physical

plane of the Dendritic device

i.e. either left/right or

up/down depending on orientation. The other plane

of the Dendritic device functions in a similar way to a

standard horn.

The diagram here shows a TCS-122 with the horn in

two possible orientations. The one on the left is the

typical orientation, so for example the TCS-122/94

model has a dispersion pattern of 90 degrees wide

by 40 degrees in the vertical. The box on the right

shows the box with the horn rotated to give 40

degrees in the horizontal and 90 degrees in the vertical.

So the speaker on the left has a very controlled vertical pattern, whereas the one on the right (the

same speaker with the HF horn rotated) has a very controlled horizontal pattern.

The TCS-122 and TCS-152 are both available with three dispersion options: 60° x 40°, 90° x 60° and

60° x 40°. However note that only the 40 degree boxes benefit from being tightly arrayed, i.e with the

sides touching. So in a cluster of two or three tight packed boxes, you should use either the 60° x 40°

or 90° x 40° models and the horns should be orientated to give 40° dispersion in the horizontal plane.

The TCS-122 and TCS-152 are double trapezoidal boxes and it is this feature, in combination with the

rotatable horns that gives you the flexibility to build so many cluster options. The simple rule is that

the side that is touching the adjacent speaker needs to be orientated to 40 degrees.

The following options only apply to TCS-122 and TCS-152 models with Dendritic horns. The TCS-1561

and TCS-61 use conventional horns.

1 2 3 4 5 6 7 8

TCS series 1

Resumo do Conteúdo

Página 1 - TCS series

Arraying and Rigging TCS series TCS series Arraying and Rigging - Page 1 TCS Arraying and Rigging This document explains how TCS loudspeakers can be

Página 2

Arraying and Rigging TCS series TCS series Arraying and Rigging - Page 2 In this example the TCS-122/94 loudspeakers with horns in the standard

Página 3

Arraying and Rigging TCS series TCS series Arraying and Rigging - Page 3 cabinets where appropriate. Flying multiple cabinets When creating loudspea

Página 4

Arraying and Rigging TCS series TCS series Arraying and Rigging - Page 4 ICC-4H KIT 07G0355 A pair of steel inter-cabinet couplers for linking two

Página 5

Arraying and Rigging TCS series TCS series Arraying and Rigging - Page 5 SB-61 07G0375 The SB-61 is a swivel bracket used to hang the TCS-61 in sta

Página 6

Arraying and Rigging TCS series TCS series Arraying and Rigging - Page 6 This cluster of three TCS-152 cabinets is assembled with FP-1 flyplates and

Página 7

Arraying and Rigging TCS series TCS series Arraying and Rigging - Page 7 A simple vertical hang of TCS-122 or TCS-152 cabinets with vertical coupler

Página 8

Arraying and Rigging TCS series TCS series Arraying and Rigging - Page 8 Important notes on rigging As with all rigging, the flying of these arrays s

Modelos relacionados TCS-152

Comentários a estes Manuais

Sem comentários

Turbosound TCS-122 Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Microfones Turbosound TCS-122. Turbosound TCS-122 User Manual Manual do Utilizador

Resumo do Conteúdo

Modelos relacionados TCS-152

Comentários a estes Manuais

Manuais e produtos relacionados com Microfones Turbosound TCS-122